ETERNITY CMP 2408
The GECKO® ETERNITY CMP 2408 compressor/gate offers two separate and highly flexible compressors, expanders, gates in a single rack space unit, with a wide range of control and even an “Auto” mode for automatic “Attack” and “Release” time settings.
The GECKO® ETERNITY CMP 2408 features loads of user-friendly operation to smooth uneven levels, add sustain to vocals, basses and guitars, fatten up drums or tighten up mixes and masterings.
But there is more. We have added a touch of audiophile processing over its dynamic range with GECKO® C.R.I.S.T.A.L.® Audiophile PreAmps technology!
The GECKO® ETERNITY CMP 2408 is highly recommended for singers, musicians, and sound engineers.
SPECIFICATIONS
Inputs: Frequency Response: 20Hz ~ 20kHz, -0.5dB , Bandwidth: 0.35Hz ~ 80kHz, -3dB , Impedance: 40kΩ (Balanced), 20kΩ (Unbalanced) , Max Level: +22dBu, Connectors: ¼” TRS (2), XLR Female (2),
Outputs: Impedance: 100Ω (Balanced), 50Ω (Unbalanced), Max Level: +21dBu into > 2kΩ, Connectors: ¼” TRS (2), XLR Male (2)
Sidechain Insert: Input Impedance: > 10kΩ , Output Impedance: ≤ 2kΩ Max Level: +21dBu , THD + N: < 0.002%, any amount of compression at 1kHz, Connectors: ¼” TRS (2)
System Performance:, Intermodulation Distortion: < 0.002%, SMPTENoise: < -93dBu, Unweighted, Dynamic Range: > 114dB, Unweighted, Crosstalk: < -93dB @ 1kHz, Common Mode Rejection: > 40dB (all frequencies), Stereo Coupling: True RMS Power Summing, Threshold Characteristics: Automatic Selection or Hard-Knee
Expander/Gate: Program Dependent Threshold, Compressor: -40dB ~ +20dB, Expander/Gate: -60dB ~ +10dB, Ratio: Compressor: 1:1 ~ Infinity:1, Expander/Gate: 1:1 ~ 4:1, Gain Structure: GECKO® C.R.I.S.T.A.L.® Audiophile PreAmps
Attack Time: Compressor: Scalable Program Dependent , Expander/Gate: < 100µs
Release Time: Compressor: Scalable Program Dependent, Expander/Gate: Program Dependent
PHYSICAL PROPERTIES
Enclosure: Steel, Color: Metallic Grey, Net Weight: 2.50Kg, Dimension: (H) 45mm x (W) 483mm x (D) 150mm
Specifications subject to change without prior notice.
Manufactured under ISO9000 certified management system.
DESTINY EQ 260
GECKO® DESTINY EQ 260 complete equalization & speaker management system offers a redefined high standard audio signal processing; delivering the best out of your quality sound system.
Equipped with forty carefully pre-designed programs, the DESTINY EQ 260 is purpose-built to accommodate virtually any sound reinforcement and installation application through quality, state-of-the-art, 24-bit, 48kHz processor, while all editing functions and configuration possibilities of the EQ 260 can be performed by utilizing the onboard user-friendly and intuitive function buttons. Coupled with the user interface LCD display, complete and flexible editing performance is achieved in a simple and convenient way.
Apart from the 24-bit, 48kHz codec, the GECKO® DESTINY EQ 260 also offers two independent channels of highly-precise 28-bit DSP processing power with a linkable 28-band graphic equalizer, incorporating GECKO® Stereo Compressor Module (GSCM)™, notch filters, feedback eliminator, parametric equalizers, limiters, band pass filters, noise gates, automatic gain control and alignment delay functions.
In order to protect all your detailed parameter editing and configuration modification settings of your GECKO® DESTINY EQ 260, the unit is equipped with a robust Security System Setup (SSS), incorporating security features such as program locking, account changing, system locking and password changing.
SPECIFICATIONS
Display: Screen: Full Color QVGA (320 x 240) TFT
Data Communication: Ports: RS232 (1), ICD (1)
Inputs: Connectors: XLR Female (2), Type: Electronically Balanced, Impedance: 40kΩ, Input Level Range: -Infinity ~ +20dB
Outputs: Connectors: XLR Male (6), Type: Electronically Balanced, Impedance: 120Ω, Input Level Range: -Infinity ~ +20dB, Alignment Delay: 0:00 ~ 59.58ms (Pre-Crossover), 0:00 ~ 19.89ms (Post-Crossover)
A/D Performance:, Type: 24-Bit Codec , Dynamic Range: >106dB Unweighted, >110dB A-Weighted, Sample Rate: 48kHz
D/A Performance: Type: 24-Bit Codec, Dynamic Range: 110dB Unweighted, 112dB A-Weighted, Sample Rate: 48kHz
System Performance: Type: 28-Bit DSP (2), Dynamic Range: 110 dB Unweighted, >106dB Weighted , THD+N: 0.002% Typical at +4dBu, 1kHz, 0dB Input Gain , Frequency Response: 20Hz ~ 20kHz, +/- 0.5dB, Inter-Channel Crosstalk: >110dB, 120dB Typical, Crosstalk Input to Output: >100dB
Physical Properties: Enclosure: Steel with Brushed Aluminium Faceplate, Color: Metallic Grey / Silver, Net Weight: 3.40Kg, Dimension: (H) 65mm x (W) 483mm x (D) 204mm
Specifications subject to change without prior notice.
Manufactured under ISO9000 certified management system.
DESTINY EQ 7043
The GECKO® DESTINY EQ 7043 graphic equalizer is a very useful audio signal processing tool in situation where precise frequency control is required across the audible frequency spectrum (i.e. music masterings).
The GECKO® DESTINY EQ 7043 graphic equalizer can be used in tuning any acoustical environment (i.e. home theater rooms, recording and mastering studios, concert halls), to stop ringing, increase clarity, and flatten the overall frequency response of the environment.
SPECIFICATIONS
Inputs: Connectors: ¼” TRS (2), XLR Female (2), and Barrier Terminal Strip, Type: Electronically Balanced/Unbalanced, RF Filtered , Impedance: 40kΩ (Balanced), 20kΩ (Unbalanced) , Max Input Level: > +21dBu, Balanced or Unbalanced, CMRR: > 40dB, Typical > 55dB at 1kHz
Outputs: Connectors: ¼” TRS (2), XLR Male (2), and Barrier Terminal Strip, Type: Impedance-Balanced/Unbalanced, RF Filtered, Impedance: 200Ω (Balanced), 100Ω (Unbalanced), Max Output Level: > +21dBu Balanced/Unbalanced into 2kΩ or greater/ > +18dBm, Max Output Impedance: Balanced/Unbalanced (into 600Ω)
System Performance: Frequency Response: 20Hz ~ 20kHz, +0.5 / -1dB, Bandwidth: < 10Hz ~ > 50kHz, +0.5 / -3dB, Dynamic Range: 109dB (+/-15dB Range), 115dB (+/-6dB Range), Signal-to-Noise: 90dB (+/-15dB Range), 97dB (+/-6dB Range), THD+N: < 0.005%, Inter-Channel Crosstalk: < -80dB, 20Hz ~ 20kHz
Function Switches: EQ BYPASS: Bypasses the GRAPHIC EQUALIZER section in the signal path, LOW CUT (Recessed): Activates the 40Hz 18dB/Octave Bessel High-Pass Filter, RANGE: Selects either +/- 6dB or +/- 15dB Slider Boost (+) / Cut (-) Range
Physical Properties: Enclosure: Steel, Color: Metallic Grey, Net Weight: 5.50Kg , Dimension: (H) 135mm x (W) 483mm x (D) 204mm
Specifications subject to change without prior notice.
Manufactured under ISO9000 certified management system.
RELATED ARTICLES
Article 1 Article 2 Article 3 Article 4 Article 5 Article 6 Article 7 Article 8 Article 9
UTOPIA DSP 2206
The GECKO® UTOPIA DSP 2206 digital multi effects unit features industry’s latest 32-bit Digital Signal Processing (DSP) technology coupled with the ease of analog use and feel. The GECKO® UTOPIA DSP 2206 is designed to operate in STEREO and/or in MONO settings, bringing out the best of tone color to your vocals and instruments, in live or professional studio applications.
The GECKO® UTOPIA DSP 2206 digital multi effects unit includes the following features and more:
* stereo effects processor;
* stereo inputs and outputs;
* 16 different effects types;
* 2 adjustable parameters on each effect
* reverb and delay tails continue when effect is switched off;
* mix control;
* input and output level controls;
* defeat connector doubles as speed control for rotary speaker;
* bicolor clip LED.
SPECIFICATIONS
Frequency Response: Dry Signal: 20Hz ~ 20kHz, Effect Signal: 20Hz ~ 20kHz
AD and DA Conversion: Rate: 31.25kHz, Quantization: 32-Bit
Signal-to-Noise Ratio: Dry Signal: 100dB, Unweighted, Effect Signal: 80dB, Unweighted
Inputs: Left/Mono, Right: -20dBV, minimum; +10dBV, maximum Impedance: 500kΩ, Connectors: ¼” TRS (2)
Outputs: Left/Mono, Right: +6dBV, maximum Impedance: 1kΩ, Connectors: ¼” TRS (2)
Rotary Speaker Speed Defeat: Impedance: 1kΩ Connectors: ¼” TRS (1)
Headroom: Clip: -6dB down from maximum
Physical Properties: Enclosure: Steel, Color: Metallic Grey, Net Weight: 1.60Kg, Dimension: (H) 40mm x (W) 483mm x (D) 110mm
Specifications subject to change without prior notice.
Manufactured under ISO9000 certified management system.
RELATED ARTICLES